43 Commits
Author SHA1 Message Date
steve 3685308d10 Merge pull request 'Fill mode: a "grid" layout that plants individual plants in rows' (#95) from feat/fill-mode into main
Build image / build-and-push (push) Successful in 6s
2026-07-22 04:22:46 +00:00
steveandClaude Opus 4.8 c80cf15bf1 Address fill-mode review: grid edge inset + drop dead coverage append
Build image / build-and-push (push) Successful in 18s
Gadfly findings on #95:

- Correctness (3 models): the shared inset formula radius-spacing/2
  collapses to 0 in grid mode (radius = spacing/2), so grid's outer row
  planted flush on / overhanging the bed edge instead of the half-spacing
  in that the rule wants. The inset genuinely differs by layout — a grid
  plant sits AT the plop centre (inset spacing/2), a clump's plants reach
  its rim (inset radius-spacing/2, overhanging by a half). Split it into a
  new edgeInset(radius, spacing, layout); hexCenters now takes a
  precomputed inset and is pure geometry (no spacing/layout knowledge).
  Regression guard: grid plants land at ±25 on a 60cm bed, not ±30.

- Performance (2 findings): the in-loop `existing = append(existing, *p)`
  was dead — every plop in one fill shares a radius and sits on a distinct
  lattice point, and a plop is "covered" only when wholly inside another,
  impossible between equal-radius circles at different centres. Removing it
  stops the coveredByExisting scan growing during the fill (an empty-bed
  grid fill's check was needlessly quadratic in the plop count).

- Docs: FillRegion/fillLoaded/hexCenters comments and the DESIGN.md bullets
  updated for plopRadiusFor/edgeInset (were still citing defaultPlopRadius
  and "written out in hexCenters").

- Test hygiene: split the grid + bad-layout cases out of TestFillAndClearAPI
  into TestFillLayoutAPI (one concern per test).

The enum-tag finding is a non-issue: majordomo's DefineTool derives its arg
schema from the same struct-tag reflection as Generate (proven by the vision
SeedPacket enum), and the service validates mode regardless.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01H3zbym8Doka2d7D48maSgZ
2026-07-22 00:21:47 -04:00
steveandClaude Opus 4.8 6a4fd40bc3 Address seed-packet review: 413 mapping, deadline, rollback, dedup
Build image / build-and-push (push) Successful in 6s
Gadfly findings on #94, the real ones:

- scanSeedPacket extends only the READ deadline; a slow upload + a live
  vision call runs past the server's absolute 30s WriteTimeout and the
  successful response is silently dropped (the #78 failure mode). Extend
  the write deadline too (scanWriteTimeout).
- An oversized upload tripping MaxBytesReader was mapped to 400; it's 413.
  Detect *http.MaxBytesError and report IMAGE_TOO_LARGE.
- Split imagenorm error mapping: ErrTooLarge->413, ErrUnsupported->400,
  genuine read/encode faults (and a failed file.Open)->500, not 400.
- CreateFromPacket discarded the plant it created when the lot then
  failed, contradicting its own doc. Roll the new plant back instead so
  the confirm is all-or-nothing (a fresh plant has no lots/plantings, so
  the delete is safe; log-and-continue on cleanup failure).
- Dedup: packetLotRequest and seedLotCreateRequest shared every lot
  field. Extract a seedLotFields base both use. validCategory now reuses
  plantCategories. EffectiveConfig resolves agent+vision from one
  settings-row read instead of two.
- capabilities swallowed an EffectiveVision error silently; log it.
- vision test hand-copied Extract's body (drift risk). Split generate()
  out of Extract so the hermetic test drives the real request builder.

Tests: rollback-on-lot-failure (service), oversized->413 (api).

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01H3zbym8Doka2d7D48maSgZ
2026-07-22 00:13:42 -04:00
steveandClaude Opus 4.8 7c1faa1515 Fill mode: a "grid" layout that plants individual plants in rows (#77)
Build image / build-and-push (push) Successful in 6s
Gadfly review (reusable) / review (pull_request) Successful in 12m51s
Adversarial Review (Gadfly) / review (pull_request) Successful in 12m51s
Steve chose option 3: keep clumps as the default primitive, add a grid/rows
fill mode, so sketching and planning are different operations with different
outputs rather than one model forced to be both.

A plop is a CLUMP, not a plant — great for "a few plops of garlic in a corner",
useless for drawing a plantable 8-rows-of-garlic bed (that came out as ~15
blobs, #77). FillLayout selects what a fill packs:
- clump (default, unchanged): radius 1.5×spacing, ~7 plants per plop.
- grid: radius spacing/2, pitch = spacing, ONE plant per plop — rows you could
  actually plant from.

The geometry is the SAME hexCenters lattice and the SAME #75 half-spacing edge
rule; only the radius→spacing relationship differs (plopRadiusFor). Grid keeps
no 15cm floor — its whole point is true spacing — while clump keeps it so a
tiny-spacing plant doesn't make invisible clumps.

Threaded through FillRegion/FillNamedRegion (empty layout = clump, so existing
callers are unchanged; unknown layout = ErrInvalidInput), the REST /fill
endpoint (`layout`), and the agent's fill_region tool (`mode`, enum clump|grid),
so "plant the bed in rows" works.

Tests: grid produces many more, single-plant plops than clump on the same bed
(radius spacing/2, derived count 1); unknown layout is refused at both the
service and the API. maxFillPlops still caps a grid fill of a huge bed.

No frontend fill affordance exists yet (fill is agent-only in the UI; the fill
UI was deferred in #82), so the mode toggle rides along when that's built —
noted. Docs: DESIGN placement-model decision.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01H3zbym8Doka2d7D48maSgZ
2026-07-22 00:01:27 -04:00
steveandClaude Opus 4.8 156b3fd14c Seed-packet capture: vision model, extraction, catalog match, create (backend) (#81)
Build image / build-and-push (push) Successful in 7s
Gadfly review (reusable) / review (pull_request) Successful in 9m44s
Adversarial Review (Gadfly) / review (pull_request) Successful in 9m44s
Photograph a seed packet → it fills in the plant and the purchase. This is the
backend; the scan UI is a follow-up PR.

Vision model config (mirrors the agent model from #79):
- Migration 0011 adds instance_settings.vision_model; PANSY_VISION_MODEL is the
  env default. Precedence Settings → env → empty; the KEY stays in the env.
- EffectiveVision resolves it; /capabilities advertises "vision" only when a
  model + key are configured, so the UI offers the scan button only when it works.

Extraction is one-shot, NOT an agent loop (internal/vision):
- majordomo.Generate[SeedPacket] derives a JSON schema from the struct tags and
  hands the image to the vision model; it can't call a tool, so it can't touch
  the garden — it only reads a picture and returns data. Numeric fields are
  pointers, so a field the packet doesn't print comes back nil, not a made-up 0.
- Hermetic test: majordomo's fake provider returns canned packet JSON and
  Generate unmarshals it, image + derived schema included. No live model.

The image is normalized to JPEG at the upload boundary (imagenorm from #80),
which is where an iPhone HEIC becomes readable — majordomo's media path can't
decode HEIC. imagenorm now links into the binary (~7 MB, the cost #80 deferred).

The hard part is catalog matching, not OCR (internal/service/seed_packet.go):
- A wrong auto-match splits a variety's seed-lot history across duplicate rows,
  so the service NEVER auto-creates. matchPlants surfaces RANKED candidates
  (exact name → variety-in-name → same species, conservative and name-based),
  the user confirms, and CreateFromPacket makes the plant (new or existing) + the
  lot. Exactly one of plantId/newPlant, refused otherwise.
- Plants/lots aren't in the undo history (catalog/inventory), so no change set.
- The extractor is injectable (service.WithPacketExtractor) so ExtractSeedPacket
  and the /scan endpoint test end to end against a fake, no live model.

Endpoints: POST /seed-lots/scan (multipart image → proposal, reads only; extends
the read deadline for a slow phone upload, caps the body, maps too-large/unreadable
to clear statuses) and POST /seed-lots/from-packet (confirmed proposal → 201).

Docs: README (PANSY_VISION_MODEL), DESIGN (routes + the decision and why the
model can't touch the garden).

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01H3zbym8Doka2d7D48maSgZ
2026-07-21 23:50:50 -04:00
steve a13acedd90 Admin-gated Settings: runtime model selection, is_admin enforced (#90)
Build image / build-and-push (push) Successful in 11s
Closes #79. Agent model + on/off move into an admin-only Settings section, and
is_admin is enforced for the first time. The live Runner is hot-swapped behind an
atomic.Pointer with routes always registered, so a settings change takes effect
with no restart; /capabilities reads the pointer. Secrets stay in the env, never
the DB. Precedence: Settings → env → default. Verified live: swap on/off/model,
bad spec → 400, race-clean. Gadfly blocking round addressed (dead code removed,
error-swallowing fixed, frontend 503 handling, holder dedup).
2026-07-22 02:53:55 +00:00
steve 15734c9195 REST fill/clear on objects; clear-bed becomes one change set (#89)
Build image / build-and-push (push) Successful in 10s
Closes #82. Bed filling now exists without an LLM configured, and clear-bed is
ONE change set instead of one per plop (a 40-plop bed no longer needs 40 undos).
POST /objects/:id/fill (region by compass name or rect, degenerate rect → 400)
and /clear, thin adapters over the service methods the agent already uses. Also
fixed DESIGN.md's API block, which had dropped the unauthenticated public route.
2026-07-22 02:53:27 +00:00
steve 48057fe1f3 API-level tests for the /seed-lots route group (#88)
Build image / build-and-push (push) Successful in 7s
Closes #83 (seed-lots half). The only handler file without a sibling API test —
the exact state the journal routes shipped unreachable in. Full CRUD through the
router, derived-remaining (incl. negative/over-planted), private-to-owner ACL
(404 not 403), and requireAuth. Verified the tests catch an unregistered route.
2026-07-22 02:53:13 +00:00
steveandClaude Opus 4.8 9ab454373b Address Gadfly findings on #90 (blocking round)
Build image / build-and-push (push) Successful in 17s
- Remove config.AgentConfig.Ready() — dead after the refactor (no non-test
  callers), and its doc comment ("route registration and capabilities gate on
  this") was now false. EffectiveAgent.Ready() carries the same logic and IS
  used, see below.
- agentHolder now uses eff.Ready() and eff.APIKey instead of an inline check and
  a redundant apiKey field it held separately. This makes EffectiveAgent.APIKey/
  Ready() production-used rather than test-only, drops the duplicated readiness
  check, and simplifies newAgentHolder's signature.
- settingsPayload no longer swallows an EffectiveAgent error into a misleading
  empty "effective" view (which would read as "nothing configured"). It returns
  the error; the handlers surface it as a 500. EffectiveAgent re-reads the row
  GetInstanceSettings just returned, so a failure there is a real DB fault.
- Frontend streamChat handles 503 (assistant disabled at runtime) distinctly
  from 404 (endpoint absent) — the backend returns 503 AGENT_DISABLED now, which
  the old code mislabelled.
- Fixed the api.go comment that still said a disabled request gets a 404 — it's
  a 503.
- updateSettings uses the shared parseNullable[bool] instead of a bespoke
  parseNullableBool (now removed).
- NewRunner drops its empty-spec guard; agentmodel.Resolve already owns that
  check, so one place decides what a valid spec is.
- rebuild-on-resolve-error now documents WHY it keeps the current Runner rather
  than tearing down a working assistant on a transient DB blip: the state is
  persisted, the next rebuild reconciles, and killing a live assistant on a read
  hiccup is worse than a brief stale window.

Not changed: the store's version-conflict fallback returning GetInstanceSettings'
error instead of ErrVersionConflict when that read also fails. That's the exact
pattern every other version-guarded update uses (gardens/objects/plants); making
only this one differ would be the inconsistency. A DB read failing immediately
after the guarded UPDATE on the same local SQLite file is a disk-fault edge case,
and surfacing that error is defensible.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01H3zbym8Doka2d7D48maSgZ
2026-07-21 22:17:25 -04:00
steveandClaude Opus 4.8 33e048cea9 Address second round of Gadfly findings on #89
Build image / build-and-push (push) Successful in 16s
- Rename fillRequest → objectFillRequest to match the package's
  <resource><Action>Request convention (objectCreateRequest, gardenCreateRequest…).
- Add the missing anonymous-clear permission case (401), mirroring anonymous fill.
- Reword the makeFillPlant comment to stop referencing external branch state,
  which won't make sense once merged — just note the consolidation follow-up.
- clearObject: send no body (undefined) rather than an empty {}, and validate
  the {cleared} response with a zod schema instead of a raw type cast.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01H3zbym8Doka2d7D48maSgZ
2026-07-21 22:12:00 -04:00
steveandClaude Opus 4.8 4c4abe23c6 Use objectPlantingsPath helper instead of inline URL (#88)
Build image / build-and-push (push) Successful in 6s
Gadfly: I was wrong that no plantings-path helper existed — objectPlantingsPath
is defined in plantings_test.go in the same package. Use it for the two
planting POSTs in the remaining test.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01H3zbym8Doka2d7D48maSgZ
2026-07-21 22:06:57 -04:00
steveandClaude Opus 4.8 95b9d611c6 Test the deadline is refreshed per-frame, not just extended (#87)
Build image / build-and-push (push) Successful in 10s
Gadfly re-review: the regression test proved the stream outlives the server
WriteTimeout, but its whole run was under a second — far below the 30s
sseWriteTimeout — so it could NOT tell a per-frame refresh from a deadline set
once at open. A revert to set-once would reintroduce the unbounded-block risk
the per-frame refresh exists to prevent, and sail through the test.

Make sseWriteTimeout a var (production never reassigns it) so a test can shrink
it, and split into two focused cases sharing a streamFrames helper:

- TestEventStreamOutlivesServerWriteTimeout — server WriteTimeout 300ms, frames
  straddling it, sseWriteTimeout left at 30s. Catches #78 (no deadline
  management → server cuts the stream). Huge margin, so CI slowness only makes
  it pass more surely — addresses the "timing margin tight" finding too.
- TestEventStreamRefreshesDeadlinePerFrame — sseWriteTimeout shrunk to 400ms,
  8 frames at a 100ms tick (800ms total, 4× margin per gap). A per-frame refresh
  delivers all 8; a set-once deadline expires mid-stream and cuts it.

Verified each fails against its own regression: removing the per-write refresh
gives 3/8 on the per-frame test (EOF at ~400ms); removing both deadline calls
gives 0/3 on the outlives test. Both pass on the real code, 3× under -count.

The "clear the deadline entirely" finding was already addressed by the previous
commit (per-frame refresh); this covers it against reintroduction.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01H3zbym8Doka2d7D48maSgZ
2026-07-21 20:49:57 -04:00
steveandClaude Opus 4.8 5bdaf21828 Address Gadfly findings on #88
Build image / build-and-push (push) Successful in 13s
- Cover the plantId filter's out-of-range branch (0, -1), not just the
  non-numeric one — the handler rejects id < 1.
- Add the documented negative-remaining case: over-planting a lot (57 against
  50 bought) drives remaining to -7 through the HTTP surface. The number is a
  derived truth about what's committed, not a floor at zero, and that's the
  signal a gardener wants.
- Rename objID → oid in the remaining test to match the package convention
  (shares_test etc.).

Not taken: relocating createPlantAPI to plants_test.go — it's shared with #89's
branch and the move is cleanest once both land (consolidating with that branch's
makeFillPlant), noted on both PRs. The 409 "current" assertion style is
deliberate and reads clearly; matching journal_test.go's exact phrasing isn't
worth a divergence churn.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01H3zbym8Doka2d7D48maSgZ
2026-07-21 20:39:43 -04:00
steveandClaude Opus 4.8 7a6f6963f9 Address Gadfly findings on #89
Build image / build-and-push (push) Successful in 23s
- Reject a degenerate (zero-area or inverted) fill rect with 400 instead of
  silently planting a single plop at the object centre. An empty `"rect": {}`
  decodes to all-zeros and is caught the same way. New fillRect.degenerate()
  and a table test covering {}, zero-width, zero-height, and inverted.
- Make the rect a named type (fillRect) rather than an anonymous inline struct,
  matching the rest of internal/api, and bind the pointer to a local in the
  handler so the deref is visibly guarded rather than reading req.Rect.MinX
  under an invariant from a line above.
- ops_test: drop gid from the unpack instead of the `_ = gid` shim.
- ClearBedModal: drop the `const n = plopCount` no-op alias.

Not taken: moving createPlantAPI/makeFillPlant to a shared helper — that
consolidation spans this branch and #88 and is cleanest once both land, as
noted in the PR. Reusing an objectPlantingsPath helper: there isn't one in this
package, and the one inline use doesn't earn a new helper on its own.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01H3zbym8Doka2d7D48maSgZ
2026-07-21 20:36:45 -04:00
steveandClaude Opus 4.8 41c28592a2 Admin-gated Settings: runtime model selection, enforce is_admin (#79)
Gadfly review (reusable) / review (pull_request) Failing after 30s
Adversarial Review (Gadfly) / review (pull_request) Failing after 30s
Build image / build-and-push (push) Successful in 14s
Moves the agent model out of env-only config into an admin-editable Settings
section, and enforces is_admin for the first time — it has been in the schema
since migration 0001, plumbed to the client, and checked nowhere.

Backend:
- Migration 0010: instance_settings, a single-row (CHECK id=1) table — pansy's
  first instance-level state. Holds agent_model ('' = inherit env) and
  agent_enabled (NULL = inherit env), version-guarded like every mutable row.
  SECRETS STAY IN ENV: OLLAMA_CLOUD_API_KEY is never stored here.
- requireAdmin at the service seam (authoritative) plus a cheap middleware
  early-403. Non-admin gets 403, not 404 — settings existence isn't masked.
- EffectiveAgent resolves DB-over-env (model, enabled); key always from env.
- The live Runner is hot-swapped, not built once. agentHolder holds it behind
  an atomic.Pointer; the chat routes are now registered UNCONDITIONALLY and
  nil-check agent.get(), so a settings change turns the assistant on/off/onto a
  new model with no restart and no race against in-flight readers. /capabilities
  reads the pointer, so it reports what's live, not what booted.
- internal/agentmodel is a new leaf package holding the one place that knows how
  to turn a spec into a model. Both agent (to run) and service (to validate a
  spec before storing it) import it; it can't live in agent, which imports
  service. Settings PATCH validates the spec via Parse, so a typo is a 400 now
  rather than a broken assistant on the next turn.

Frontend:
- /settings route (admin guard), a Settings page (model field, tri-state
  enabled, live status), nav link shown only to admins.
- useCapabilities drops staleTime:Infinity — the assistant can now change under
  a running page — and the settings save invalidates it.

Contract change: chat routes always exist, so "assistant off" is a runtime 503
+ capabilities:false, not a missing route. Updated the test that asserted the
old shape.

Verified live against the built binary: disable flips capabilities to false and
logs it; re-enable with a new model swaps it back; a bad spec is rejected 400;
the setting persists across a restart. Swap is race-clean under `go test -race`.

Docs: README (precedence + key-stays-in-env), DESIGN (decision + routes),
CLAUDE (don't re-add conditional route registration; key never in the DB).

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01H3zbym8Doka2d7D48maSgZ
2026-07-21 20:27:36 -04:00
steveandClaude Opus 4.8 04cdf815df Bound each SSE write instead of removing the deadline entirely
Build image / build-and-push (push) Successful in 8s
Gadfly, security lens: clearing the write deadline outright traded the
truncation bug for an unbounded one. With no deadline, a client that stops
reading fills the socket buffer and blocks Write forever — pinning the agent
run goroutine and this stream's mutex, which also takes down the keep-alive
since it needs the same lock. The old 30s WriteTimeout at least bounded that.

Refresh the deadline per frame instead: the stream as a whole is unbounded,
but no single write is. That is the only shape that satisfies both ends, since
an absolute deadline cuts long turns and no deadline cannot be recovered from.

The probe stays in openEventStream so a writer that cannot take deadlines is
reported once rather than once per frame; the per-write call deliberately
ignores its error for the same reason.

Also widened the test's timing margins, per the second finding. tick is now
GREATER than writeTimeout, so every frame lands after the deadline has already
expired and the margin only ever grows — a loaded CI runner pushes this toward
passing rather than toward flaking. Sized the other way it would flake exactly
when CI is busiest. Passes 3/3 with -count=3.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01H3zbym8Doka2d7D48maSgZ
2026-07-21 18:23:31 -04:00
steveandClaude Opus 4.8 3cfa72cb25 REST fill/clear on objects; clear-bed becomes one change set (#82)
Build image / build-and-push (push) Successful in 18s
Gadfly review (reusable) / review (pull_request) Successful in 5m18s
Adversarial Review (Gadfly) / review (pull_request) Successful in 5m19s
FillRegion and ClearObject were reachable only through the agent toolbox, so
on an instance with no model configured the most valuable bulk operation in a
garden planner — and the one carrying the most carefully reasoned geometry in
the codebase — did not exist at all. internal/service/ops.go said these lived
on *Service so "any future REST surface" would inherit the ACL checks; this is
that surface.

POST /objects/:id/fill takes a region EITHER by compass name ("all", "ne",
"south half") or as an explicit rect in the object's local frame, and refuses
both-or-neither: silently preferring one would make a client bug look like a
geometry bug. It answers 200 rather than 201 because a fill can legitimately
create nothing (the region is already planted) and there is no single resource
to point a Location at.

POST /objects/:id/clear replaces a client-side loop of PATCHes. That loop
wrote one change set per plop, so clearing a 40-plop bed took 40 presses of
Undo to put back — while the agent's clear_object, for the identical
user-facing action, undid in one click. CLAUDE.md states the rule it violated:
multi-row operations record together so they undo as one unit. Moving it
server-side also removes the partial-failure case the loop had to reconcile.

TestClearObjectIsOneChangeSetAPI pins that: fill a bed, count change sets,
clear it, assert the count rose by exactly one.

DESIGN.md's API block gains the two new routes, and the four it was already
missing: GET/POST/DELETE /gardens/:id/share-link and the unauthenticated
GET /public/gardens/:token. An unauthenticated surface absent from the
architecture doc is the one worth fixing on sight.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01H3zbym8Doka2d7D48maSgZ
2026-07-21 18:20:54 -04:00
steveandClaude Opus 4.8 8552f1d152 API-level tests for the /seed-lots route group (#83)
Build image / build-and-push (push) Successful in 7s
Gadfly review (reusable) / review (pull_request) Successful in 6m32s
Adversarial Review (Gadfly) / review (pull_request) Successful in 6m32s
Every other handler file had a sibling API test; this group had none, which is
the state PATCH/DELETE /journal/:id shipped in — implemented, unit-tested
through the service, and completely unreachable. Service tests cannot see a
route that was never registered or one registered with the wrong :param.

Four tests, covering what a broken route would silently take with it:

- Full CRUD over HTTP, including GET/PATCH/DELETE by id, the ?plantId= filter,
  a rejected non-numeric plantId, and a stale-version 409 carrying the current
  row so the client can rebase.
- `remaining` is derived through the HTTP surface, not just in the service.
  DESIGN.md makes derivation load-bearing, and the number is the whole reason
  anyone opens the seed shelf.
- Lots are private to the buyer: another user gets 404 (not 403 — existence is
  masked per the project convention) on get/patch/delete, sees none in their
  listing, and the owner still has access afterwards.
- The group is behind requireAuth: unauthenticated calls 401 rather than
  returning an empty list.

Verified the tests actually catch the failure they exist for by unregistering
GET /seed-lots/:id — all four fail with "404 page not found", the journal
signature.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01H3zbym8Doka2d7D48maSgZ
2026-07-21 18:16:40 -04:00
steveandClaude Opus 4.8 7088f382bc Clear the SSE write deadline so a turn can outlive WriteTimeout (#78)
Build image / build-and-push (push) Successful in 5s
Gadfly review (reusable) / review (pull_request) Canceled after 9m11s
Adversarial Review (Gadfly) / review (pull_request) Canceled after 9m11s
http.Server.WriteTimeout is an ABSOLUTE deadline from when the request header
was read, not an idle timeout. pansy sets it to 30s (cmd/pansy/main.go:65)
while an agent turn is budgeted 4 minutes, so every turn over 30 seconds was
cut mid-stream. The 4-minute runTimeout was unreachable; the real ceiling was
30 seconds.

That also meant the keep-alive added in #73 could never do its job. It ticks
at 20s, so it got exactly one tick before the connection it was pacing was
destroyed underneath it — a mechanism built to survive long silences that was
structurally incapable of surviving them.

The failure is invisible from the handler: writes made after the deadline
return err == nil and their bytes are discarded. There is no error to check
and none to log, which is why this survived a review that specifically looked
at the discarded write error. Only the client sees it, as an unexpected EOF,
which web/src/lib/agent.ts reports as "The connection dropped partway
through." — indistinguishable from a real network fault.

Because it is invisible server-side, the test drives a real http.Server with a
short WriteTimeout and asserts from the CLIENT side. Against the unfixed code
it gets 1 of 4 frames and an unexpected EOF; a test that inspected the return
of io.WriteString would have passed against the bug.

gin 1.10.1's responseWriter implements Unwrap, so ResponseController reaches
the underlying conn. A failure to clear the deadline IS worth logging: it
means the stream will be cut and we cannot prevent it.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01H3zbym8Doka2d7D48maSgZ
2026-07-21 18:14:12 -04:00
steve 62604523d7 Commit history detached from cancellation on every path, not just failure (#73)
Build image / build-and-push (push) Successful in 7s
Co-authored-by: Steve Dudenhoeffer <[email protected]>
2026-07-21 12:49:18 +00:00
steve 8dbbc5439d Chat panel in the garden editor (#57) (#71)
Build image / build-and-push (push) Successful in 6s
Co-authored-by: Steve Dudenhoeffer <[email protected]>
2026-07-21 06:43:22 +00:00
steve 3a3ce16fce Agent runtime: majordomo in-process, Ollama Cloud config, chat endpoint (#56) (#70)
Build image / build-and-push (push) Successful in 6s
Co-authored-by: Steve Dudenhoeffer <[email protected]>
2026-07-21 06:22:10 +00:00
steve 7f8b5254d0 Journal UI: write and read season notes where you're already looking (#53) (#67)
Build image / build-and-push (push) Successful in 11s
Co-authored-by: Steve Dudenhoeffer <[email protected]>
2026-07-21 05:55:45 +00:00
steve 8c5ddb21ec Season view: filter the editor to a year (#54) (#66)
Build image / build-and-push (push) Successful in 17s
Co-authored-by: Steve Dudenhoeffer <[email protected]>
2026-07-21 05:47:34 +00:00
steve b96ca1ec0a Grow journal: time-stamped notes on gardens, beds and plantings (#52) (#65)
Build image / build-and-push (push) Successful in 6s
Co-authored-by: Steve Dudenhoeffer <[email protected]>
2026-07-21 05:40:17 +00:00
steve 78a04672b5 Seed provenance + inventory: source links and seed lots (#50) (#64)
Build image / build-and-push (push) Successful in 8s
Co-authored-by: Steve Dudenhoeffer <[email protected]>
2026-07-21 05:39:24 +00:00
steve f208da94d6 Revision history: change sets + revisions + revert — the undo substrate (#48) (#61)
Build image / build-and-push (push) Successful in 5s
Co-authored-by: Steve Dudenhoeffer <[email protected]>
2026-07-21 05:07:30 +00:00
steve e22bdd6cab Copy a garden (deep duplicate) from the gardens list (#46)
Build image / build-and-push (push) Successful in 16s
Co-authored-by: Steve Dudenhoeffer <[email protected]>
2026-07-21 03:58:39 +00:00
steve e74fb308c1 Configurable grid + snap-to-grid in the layout system (#45)
Build image / build-and-push (push) Successful in 7s
Closes #44. Two independent grids (garden + per-bed), each with a size and a snap toggle; snapping defaults off. See PR #45 for details.

Co-authored-by: Steve Dudenhoeffer <[email protected]>
2026-07-19 07:07:14 +00:00
steve 9968c06243 Public read-only share link (no login / no OIDC) (#41) (#43)
Build image / build-and-push (push) Successful in 8s
Per-garden public read-only link: unauthenticated GET /api/v1/public/gardens/:token (no requireAuth, no OIDC), owner-only enable/rotate/disable, and a /g/$token page rendering GardenCanvas read-only. Review fixes: redact plant owner ids, Cache-Control: no-store, 400 on malformed body, shared resetTransient store action.

Closes #41.

Co-authored-by: Steve Dudenhoeffer <[email protected]>
2026-07-19 06:18:31 +00:00
steve 2a86f87b50 Sharing backend: shares CRUD + ACL enforcement everywhere (#16)
Build image / build-and-push (push) Successful in 4s
Co-authored-by: Steve Dudenhoeffer <[email protected]>
2026-07-19 03:49:54 +00:00
steve f4e5dab98c Plantings backend: plop CRUD, derived counts, removed_at (#14)
Build image / build-and-push (push) Successful in 7s
Co-authored-by: Steve Dudenhoeffer <[email protected]>
2026-07-19 02:41:22 +00:00
steve 293532f021 Plant catalog backend: CRUD + seeded built-ins (#12)
Build image / build-and-push (push) Successful in 5s
Co-authored-by: Steve Dudenhoeffer <[email protected]>
2026-07-19 01:48:22 +00:00
steveandClaude Opus 4.8 0793fef17c Address Gadfly review on #10: clearable color/props, column lists, dedup
Build image / build-and-push (push) Successful in 7s
Fixes from the PR #28 adversarial review (considered; not graded).

Correctness / API
- PATCH /objects/:id can now clear nullable color/props back to NULL: the
  request takes them as json.RawMessage, and ObjectPatch carries an explicit
  Set flag so an explicit `null` (clear) is distinguished from an absent
  field (unchanged) — the strongest cross-model finding (6 hits). New test.

Maintainability
- store/plantings.go + plants.go use explicit qualified column lists
  (qualifyColumns helper) instead of SELECT *, matching gardens/objects and
  surviving a future column add.
- Consolidated objectKinds + plantableByDefault into one kind→traits map.
- objectForRole factors the fetch-then-authorize shared by UpdateObject and
  DeleteObject; dropped the redundant kind check in CreateObject
  (finalizeObject is the single validation point).
- Request→service mapping via toInput()/toPatch() methods (matches gardens).
- Renamed handler gardenFull → getGardenFull (verbNoun); test helper
  decodeGarden → decodeMap; generic bind-error messages.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01JdQpdYYsTgtkJBxbcpAszi
2026-07-18 19:47:10 -04:00
steveandClaude Opus 4.8 3dd935fb19 Add garden objects backend: polymorphic CRUD + /full (#10)
Build image / build-and-push (push) Successful in 6s
Gadfly review (reusable) / review (pull_request) Successful in 10m9s
Adversarial Review (Gadfly) / review (pull_request) Successful in 10m9s
Garden objects (beds, bags, containers, in-ground, trees, paths,
structures) in one polymorphic table, following the #7 service
conventions.

- store/objects.go: scanObject + Create (RETURNING), Get, ListForGarden
  (z_index order), version-guarded Update (RETURNING, returns current row
  on conflict), Delete (plantings cascade via FK).
- store/plantings.go + plants.go: the read side /full needs now —
  ListActivePlantingsForGarden (removed_at IS NULL) and
  ListReferencedPlants (distinct plants used by active plantings). Both
  return empty until #14 adds plantings; #12/#14 extend these files.
- service/objects.go: Create/Update(partial patch)/Delete/GardenFull, all
  (ctx, actorID, ...) through requireGardenRole(editor for mutations,
  viewer for /full). finalizeObject validates kind + shape (rect/circle;
  polygon reserved), finite dims in [1cm,100m], NaN/Inf rejection, loose
  bbox-overlaps-garden placement (partial overhang OK), hex color, valid
  JSON props, name/notes caps; normalizes rotation to [0,360). Plantable
  defaults by kind, overridable.
- api/objects.go: POST /gardens/:id/objects, PATCH/DELETE /objects/:id,
  GET /gardens/:id/full ({garden,objects,plantings,plants}). props is any
  JSON value stored as text; PATCH is partial + required version, 409
  returns the current row.

Tests: service (defaults, plantable-by-kind, rotation normalize,
validation rejects incl. off-field/polygon/bad-color/bad-props, partial
patch + version conflict, cross-user ErrNotFound, delete, /full shape) and
api (CRUD + /full, 409 envelope, cross-user 404, polygon/no-kind 400,
props round-trip).

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01JdQpdYYsTgtkJBxbcpAszi
2026-07-18 19:30:30 -04:00
steveandClaude Opus 4.8 3fbefa4e05 Address Gadfly review on #7: garden cap, dim validation, shared errors
Build image / build-and-push (push) Successful in 5s
Fixes from the PR #26 adversarial review (graded 18 real / 0 false positive).

Correctness / security
- maxGardenCM fixed to 10_000 (100 m), matching its comment — it was
  100_000 cm (1 km), 10x too lax (5 models flagged this).
- Dimension validation now rejects NaN/Inf (which slip past naive
  comparisons) and subnormal-tiny positives, via a finite [1cm, 100m]
  check. Name (200) and notes (10_000) are length-capped so untrusted
  input can't balloon storage.
- Update version binding is `required,min=1`, so a negative/zero version
  is a 400, not a 409.

Maintainability / performance
- One unified writeServiceError (new errors.go) maps every auth + resource
  sentinel; writeResourceError removed. writeVersionConflict and
  parseIDParam moved to errors.go (shared, not in the gardens feature file).
- Request structs share an embedded gardenFields (one toInput).
- CreateGarden uses INSERT ... RETURNING (one round-trip).
- ListGardensForOwner has a defensive LIMIT (pagination is post-v1).

Tests: name/notes length, NaN/Inf/subnormal dims, dimension-at-cap valid,
negative/zero version -> 400.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01JdQpdYYsTgtkJBxbcpAszi
2026-07-18 18:39:27 -04:00
steveandClaude Opus 4.8 f39ed52868 Add gardens CRUD + service-layer conventions (#7)
Build image / build-and-push (push) Successful in 4s
Gadfly review (reusable) / review (pull_request) Successful in 9m56s
Adversarial Review (Gadfly) / review (pull_request) Successful in 9m56s
Establishes the patterns every later backend issue copies: the actor
parameter, centralized role checks, and the version-guard/409 sync
protocol. The service layer is the seam both REST handlers and future
agent tools call, so permissions live here, not in handlers.

- service/gardens.go: Service methods take (ctx, actorID, args).
  requireGardenRole(ctx, actor, gardenID, min) is THE authorization point
  — owner is implicit via owner_id now; #16 extends it to consult
  garden_shares. A user with no role gets ErrNotFound (existence masked),
  not ErrForbidden. Create/Get/List/Update/Delete with input validation
  (name required, 0 dims default to 10 m on create / rejected on update,
  negatives always rejected, unit metric|imperial, 100 m cap).
- store/gardens.go: version-guarded UPDATE ... WHERE id=? AND version=?
  RETURNING; a no-match re-reads to return (current row,
  ErrVersionConflict) vs ErrNotFound. ListGardensForOwner returns a
  non-nil slice.
- api/gardens.go: GET,POST /gardens and GET,PATCH,DELETE /gardens/:id
  behind requireAuth. writeVersionConflict documents the 409 envelope
  ({error:{code,message}, current:{...}}) — the contract for every
  mutable resource. writeResourceError maps ErrNotFound/Forbidden/
  InvalidInput/VersionConflict; parseIDParam guards path ids.

Tests: service (defaults, validation, owned-only list, version
conflict returns current + retry, cross-user ErrNotFound, delete) and
api (full CRUD flow, 409 envelope shape, cross-user 404, auth required,
create validation). Verified against the running binary: create stores
imperial 122x244 cm and list returns it.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01JdQpdYYsTgtkJBxbcpAszi
2026-07-18 18:20:39 -04:00
steveandClaude Opus 4.8 8ef092713f Address Gadfly review on #5: OIDC identity guard, verified-email, timeouts
Build image / build-and-push (push) Successful in 9s
Fixes from the PR #24 adversarial review (graded 23 real / 1 false positive):

Security / correctness
- LinkOIDC no longer overwrites a different stored identity: the UPDATE
  matches only when the row has no identity yet or already carries this
  exact one, so a second IdP asserting the same verified email can't
  hijack or lock out an account (returns ErrOIDCIdentityConflict). Uses
  a single UPDATE...RETURNING (also fixes the ignored-RowsAffected /
  misleading-ErrNotFound path and the round-trip).
- Provisioning now requires a verified email for BOTH linking and JIT
  creation (was: linking only), so an unverified-email identity can't
  create an account — nor become the first admin on a fresh instance,
  nor squat an email a real user later owns.
- OIDC-identity collisions surface as the dedicated ErrOIDCIdentityConflict
  instead of the email-specific ErrEmailTaken.

Robustness
- readOIDCTxCookie requires a non-empty nonce (an empty one would make the
  callback's nonce check pass vacuously).
- Callback token exchange + verify run under a 15s context timeout so a
  slow IdP can't outlast the server write timeout.
- ensure() performs discovery outside the mutex, so concurrent cold-start
  requests don't serialize behind one another's full timeout.
- setOIDCTxCookie returns its marshal error; oidcLogin aborts rather than
  redirecting to the IdP with no tx cookie.

Maintainability
- redirectAuthError helper dedups the ~dozen callback redirects (and the
  empty-code path now logs like the rest).
- Distinct login error codes (no_email / email_unverified / oidc_conflict)
  for the UI; writeServiceError maps the OIDC sentinels; shared test issuer
  const.

Tests: unverified email refused for both link and JIT; identity-overwrite
refused while the original identity keeps working.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01JdQpdYYsTgtkJBxbcpAszi
2026-07-18 17:33:25 -04:00
steveandClaude Opus 4.8 84edf3e42a Add OIDC login via Authentik: PKCE, JIT provisioning, email linking (#5)
Build image / build-and-push (push) Successful in 5s
Gadfly review (reusable) / review (pull_request) Successful in 9m32s
Adversarial Review (Gadfly) / review (pull_request) Successful in 9m32s
OIDC is pansy's primary login path (Authentik the target IdP); local
auth (#4) remains the fallback and both issue the same session cookie.

- deps: github.com/coreos/go-oidc/v3 + golang.org/x/oauth2 (both pure Go;
  CGO stays off).
- api/oidc.go: lazy issuer discovery (retried per-request, never crashes
  a server that also serves local auth), GET /auth/oidc/login builds an
  authorization-code URL with PKCE S256 + random state + nonce stashed in
  a short-lived HttpOnly cookie, GET /auth/oidc/callback verifies state
  (constant-time), exchanges the code with the PKCE verifier, verifies the
  ID token + nonce, and starts a pansy session. Failures redirect to
  /login?error=... ; success to /gardens.
- service.LoginOIDC: (issuer,subject) match -> login; else *verified*
  email match -> link onto the existing account; else JIT-create (the IdP
  gates access, so PANSY_REGISTRATION doesn't apply). Unverified email
  colliding with an existing account is refused (takeover guard); no email
  is refused (email is the account key). Reuses the atomic CreateUser.
- store: GetUserByOIDC + LinkOIDC (unique-pair backstop).
- config: OIDCReady() (needs issuer+client+BaseURL for the redirect URI);
  /auth/providers now reports oidc from it and defaults the button label
  to "Sign in with Authentik". OIDC routes are only registered when ready,
  so an unconfigured instance 404s them.
- PANSY_LOCAL_AUTH=false rejects/hides local auth but not OIDC.

Tests: service provisioning (JIT, repeat login, link, unverified-collision
refusal, no-email, name fallback, works with local auth off); api
(routes-absent-when-unconfigured, providers reporting, login redirect with
PKCE params + tx cookie via a fake discovery server, callback state/error
paths). Smoke-tested: unreachable issuer degrades to error=oidc_unavailable
with the server still up and local auth working.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01JdQpdYYsTgtkJBxbcpAszi
2026-07-18 17:13:47 -04:00
steveandClaude Opus 4.8 02c928ac6d Address Gadfly review on #4: TOCTOU, sliding cookie, CSRF, argon2
Build image / build-and-push (push) Successful in 5s
Fixes from the PR #23 adversarial review (graded 35 real / 1 false positive):

Security / correctness
- Race-free registration: is_admin and the registration gate are now
  computed atomically inside a single INSERT...SELECT, so concurrent
  first registrations can't both become admin or bypass closed
  registration (fixed the whole TOCTOU cluster).
- Sliding session now reaches the browser: ResolveSession returns the
  current expiry and requireAuth re-sets the cookie, so active users
  aren't logged out 30 days after login regardless of activity.
- Login CSRF: csrfGuard rejects state-changing requests whose Origin
  doesn't match PANSY_BASE_URL (no-op when unset, so the dev proxy is
  unaffected). SameSite=Lax alone didn't cover this.
- argon2id tuned to RFC 9106's second recommended profile (t=3).
- Timing equalizer can't fail open: the dummy hash is derived
  deterministically (fixed salt, no RNG) so it's always present.
- Password length (<=1024) enforced in the service for both register
  and login, not just HTTP binding tags; login rejects over-long input
  before spending argon2 work.

Error handling / robustness
- Login logs a malformed stored hash instead of silently treating it as
  a wrong password.
- Best-effort session writes (Touch/Delete during renewal, expiry, and
  corrupt-expiry cleanup) now log on failure.
- index sessions.expires_at via new migration 0002 (0001 is immutable).

Maintainability
- Extract startSessionAndRespond and abortUnauthenticated; make
  writeServiceError a free function; consistent error handling in
  decodeHash; doc/comment fixes.

Tests: over-long password, CSRF guard (cross-origin/same-origin/dev
no-op), and cookie refresh on authenticated requests; migration-version
assertions bumped to 2.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01JdQpdYYsTgtkJBxbcpAszi
2026-07-18 17:04:35 -04:00
steveandClaude Opus 4.8 0e41ccd95a Add local auth: users, sessions, register/login/logout/me (#4)
Build image / build-and-push (push) Successful in 8s
Gadfly review (reusable) / review (pull_request) Successful in 7m7s
Adversarial Review (Gadfly) / review (pull_request) Successful in 7m7s
Implements pansy's local (email + password) authentication and the
session layer that OIDC (#5) will also reuse.

- store: users.go (create/get-by-id/get-by-email/count) and sessions.go
  (create/get/touch/delete/delete-expired), scanning the existing 0001
  schema.
- service: the business-logic seam. auth.go (Register/Login/session
  lifecycle/Providers) + password.go (argon2id, 64 MiB/1/4, PHC-encoded,
  constant-time verify) + service.go (Service, clock injection, token
  hashing). First user is admin; closed registration still allows the
  bootstrap user; unknown-email and wrong-password are indistinguishable
  (same error, same argon2 work via a dummy hash).
- api: POST /auth/register|login|logout, GET /auth/me|providers, plus a
  requireAuth middleware that resolves the HttpOnly session cookie
  (SameSite=Lax, Secure under https) to the actor. Handlers stay thin.
- main: wires the service and a periodic expired-session sweep; sessions
  are also dropped lazily on access. Sliding 30-day expiry.
- tests: service (register/login/expiry/renewal/cleanup, password) and
  api (cookie flow, middleware, validation, providers).

Verified end-to-end via curl: register -> me -> restart -> session
persists -> logout -> 401.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01JdQpdYYsTgtkJBxbcpAszi
2026-07-18 16:38:03 -04:00
steveandClaude Opus 4.8 0f3dedab73 Address Gadfly review findings on Phase 0
Applied the fixes warranted by the adversarial review of PR #21 (all
findings graded in the gadfly store):

Store (highest impact):
- buildDSN always merges busy_timeout/journal_mode/foreign_keys pragmas
  into the DSN, even for file: URIs or paths with a query string — the
  prior passthrough silently disabled FK enforcement for those PANSY_DB
  values. Also escape '#' in the path and tighten in-memory detection to
  an exact ':memory:' token or mode=memory param (no substring misfire).
- migrate.go: detect duplicate migration versions with a clear error;
  wrap appliedVersions' rows.Err() with the store: prefix.

API:
- SetTrustedProxies failure now falls back to trust-none instead of
  leaving gin's trust-everyone default (X-Forwarded-For spoofing).
- SPA: 404 embedded directories (was a directory listing), 404 bare /api,
  add X-Content-Type-Options: nosniff, cache index.html bytes once at
  startup, single fs.Stat existence check, shared writeAPIError helper.
- Move gin.SetMode out of package init() into New().

Config: validate PANSY_PORT range (fall back to 8080 with a warning).

Web:
- api.ts: serialize the request body before the fetch try so a
  JSON.stringify failure isn't misreported as a network error.
- AppShell: move state-specific/conflicting utilities into
  active/inactiveProps so concatenated Tailwind classes don't collide.

Tests: added store DSN-pragma/memory-detection cases and SPA
directory-404 case. go build/vet/test clean (CGO off); web tsc + build
clean; re-verified in a browser (SPA, deep links, /assets 404, nav).

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01JdQpdYYsTgtkJBxbcpAszi
2026-07-18 15:19:30 -04:00
steveandClaude Opus 4.8 91da9ff945 Phase 0: backend + frontend scaffold, single-binary build
Gadfly review (reusable) / review (pull_request) Successful in 10m8s
Adversarial Review (Gadfly) / review (pull_request) Successful in 10m9s
Implements the Pansy v1 scaffold (epic #20, phase 0).

#1 Backend: Go module (pure-Go, builds with CGO_ENABLED=0), env config,
   gin server with slog + recovery + /api/v1/healthz, modernc SQLite store
   with WAL/busy_timeout/foreign_keys pragmas, embedded numbered-migration
   runner, full initial schema (users, sessions, gardens, garden_shares,
   garden_objects, plants, plantings), domain structs + sentinel errors,
   graceful shutdown.

#2 Frontend: Vite + React 19 + TS (strict) + Tailwind 4 + TanStack
   Router/Query, typed /api/v1 fetch wrapper (ApiError carries status +
   body so later issues can read 409 conflict rows), dev proxy /api -> :8080,
   responsive app shell with stub pages for all five routes.

#3 Single binary: //go:embed of the web build with a committed placeholder,
   SPA fallback (deep links, immutable asset caching, JSON 404 for unmatched
   /api and missing assets), Makefile (web/build/dev/test), README quickstart
   + env var table.

Verified: go build/vet/test clean (CGO off); binary migrates idempotently and
serves healthz; web tsc + build clean; integrated binary serves the SPA, deep
links, and correct cache headers; app mounts and navigates all five routes at
desktop and 375px widths.

Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01JdQpdYYsTgtkJBxbcpAszi
2026-07-18 14:52:05 -04:00